To program the new XR15 remotes, press and hold the 'Contour' and 'Mute' buttons together for 5 seconds in step 1, instead of 'Setup'. If the device does not turn off or the volume controls do not work, repeat the steps above using the next code listed for your TV/Audio device manufacturer. Turn the device back on and press the 'VOL+/-' and 'Mute' buttons to confirm they control the volume of your TV/Audio device. If the device turns off, you have successfully programmed your remote. Step 3: Press the 'TV Power' or 'All Power' button on the remote. Step 2: Enter the first 5-digit code listed for the TV/Audio device manufacturer. Step 1: Press and hold the 'Setup' button (or 'Contour' + 'Mute' buttons for XR15) on your remote until the status LED changes from red to green. You might need to contact the TV manufacturer for further instructions.XR5/XR11/XR URC 78 Simplicity RT-SR Contour Big EZ Direct code entry (XR5/XR11/XR15) Use the buttons that are typically located on the front of your TV. Use the “UP” and “DOWN” arrow to loop through available choices.(the feature will be highlighted in blue). Select the Resolution feature by pressing “OK”.Use the “UP” and “DOWN” arrow buttons to select the Resolution feature.Open the Menu option via your remote control.Verify that your Set-Top Box and TV are on the correct resolution.If only one channel has poor quality, chances are the transmission that we have received is of low quality, also. Make sure all connections are plugged into the correct locations.Make sure your connections to your Set-Top Box and TV are plugged in tightly and securely.If you are experiencing poor, distorted or fuzzy images with your Digital Cable subscription, please try the following: If your cable still isn’t working, please call the Support Department at Cameron Communications. **NOTE: If you have verified that your TV is on the correct channel, and you’re cable isn’t working, then press the “STB” button once then the “Power” button one time. Then, press the “ STB” button on your remote to return to regular channel viewing.

To change the channel that is programmed into your television, press the “ TV” button on your remote, and then the correct channel associated with that remote (1=10, 2=23 and 3=39). For Remote 2, the television must be tuned to channel 23, and for Remote 3, the television must be tuned to channel 39. Each remote also has a channel that the associated television must be programmed to.įor Remote 1, the television must be tuned to channel 10. Each remote is assigned to a television, and will not work with any other television other than the one it is assigned. Your Entone remotes are labeled 1, 2 and 3 on the battery cover.

If you are experiencing trouble with your Entone Remote control (you can’t toggle channels, AND/OR when you change channels on one TV and another TV changes, also), please see below. Remote Does Not Work/Channels Change On Other TVs

Urc remote cableone